You’ve Been Cleaning Your Oven The Wrong Way Your Entire Life. This Is So Much Easier!

Make sure to like Living Green and Frugally on Facebook, Shop at Amazon to help support my site and explore our PINTEREST BOARDS  for innovative ways you can become self-sufficient.

We’ve all been there — after a delicious meal, your Pyrex dishes look like they’ve survived a fire. That stubborn burn-on stain is now part of the glass, right? Wrong! The good news is that you don’t need to spend hours scrubbing or invest in harsh, expensive chemicals to restore your Pyrex to its former glory.

In fact, you’ve likely been cleaning it the hard way this whole time. Today, I’m going to show you a much easier, natural way to tackle those stubborn stains without the hassle.

Why Pyrex Glass Gets So Stubbornly Dirty

Pyrex is a durable, heat-resistant material that’s perfect for baking, but when food burns onto the surface, it can penetrate and cling to the glass, making it tough to clean. Most people immediately reach for harsh chemicals, thinking they’re the only solution — but there’s a much better way that’s not only easier but also safer for your home.

The Simple Recipe for Cleaning Burnt Pyrex Glass

Forget soaking for hours or scrubbing with all your might. Here’s an easier and more effective way to clean those pesky stains with just a few ingredients you probably already have in your kitchen.

You’ll Need:

• Baking soda (about 2 tablespoons)
• White vinegar (½ cup)
• Dish soap (a few drops)
• A non-abrasive sponge or brush
• Hot water
• Lemon (optional)

Instructions:

1. Create a paste – Mix 2 tablespoons of baking soda with enough water to form a thick paste. Baking soda acts as a mild abrasive to break down the burnt residue.
2. Apply the paste – Spread the baking soda paste over the burnt areas of your Pyrex dish.
3. Let it sit – Allow the paste to sit on the stains for at least 15-30 minutes. For tough stains, you can let it sit for an hour.
4. Scrub gently – After the paste has had time to work its magic, gently scrub the area with a non-abrasive sponge or brush.
5. Vinegar rinse – Pour white vinegar over the dish to react with the baking soda. The bubbling action will help lift the remaining residue.
6. Hot water soak – Fill the dish with hot water and a few drops of dish soap. Let it soak for another 15-20 minutes.
7. Final scrub – Rinse the dish and give it a final scrub. For extra tough spots, rub a slice of lemon over the stains before rinsing.
8. Admire your work – Your Pyrex should look as good as new!

Tips for Maintaining Your Pyrex

1. Preventative care: To avoid future burn-on stains, always grease your Pyrex lightly with oil or butter before baking.
2. Regular cleaning: Clean your Pyrex immediately after use when possible, before stains have a chance to harden.
3. Avoid metal scouring pads: These can scratch the surface of your Pyrex, making it more prone to staining in the future.
4. Try vinegar and lemon: If you’re looking for extra cleaning power, use vinegar or lemon juice regularly to keep your Pyrex sparkling.

Common Questions & Answers

Q: Will this method work on other types of glass cookware?
A: Absolutely! This method is effective on any glass cookware, including other brands similar to Pyrex.

Q: What if I don’t have baking soda or vinegar?
A: If you’re missing baking soda, you can use a mixture of salt and lemon juice as a natural abrasive. For vinegar, you can use lemon juice, which also helps break down grime and has a fresh scent.

Q: How long does it take to clean using this method?
A: The total time depends on how burnt the dish is, but most stains will be gone within an hour using this technique, with minimal scrubbing required.

Q: Can I use this method for stainless steel pans or other materials?
A: Yes, this cleaning method is safe for stainless steel and ceramic as well, though be cautious of using it on non-stick surfaces to avoid scratching.

Q: How can I clean burnt food on the outside of my Pyrex?
A: Simply apply the same baking soda paste to the exterior of the dish, let it sit, and scrub. For extra tough spots, use vinegar or a lemon scrub as outlined in the steps above.

By following these simple steps, you’ll save time, energy, and elbow grease while keeping your Pyrex in top shape. Give it a try the next time you face those stubborn stains — you’ll wonder why you didn’t start doing it sooner!

Pin for later!